1. ENTER THE MAX STROKE LENGTH FOR THE MAIN CYLINDER AND/OR CUSHION
2. SET MODE SELECTOR SWITCH TO "INCH"
3. TURN ON THE SERVO MOTOR
4. PRESS THE "CALIBRATE HOME" BUTTON
5. WHILE HOME CALIBRATE DISPLAYS "HOMING", PRESS BOTH RUN BUTTONS
6. HOME CALIBRATE COMPLETES WHEN THE BUTTON RETURNS TO THE "CALIBRATE HOME" DISPLAY
7. JOG THE MAIN CYLINDER TO THE SLIDE LOCKING HOME POSITION
8. ENGAGE THE SLIDE LOCK, AND THEN PRESS "SET HOME POSITION"

SERVO SPEED %

SLIDE LOCK

SERVO PRESSURE %

CALIBRATE HOME

MAIN CYLINDER
MAX STROKE LENGTH

INCHES

MAIN CYL POSITION

CUSHION MAX STROKE
LENGTH

INCHES

***WARNING***

PRESS WILL INITIATE MOTION, AND TRAVEL THE FULL STROKE LENGTH.
ENSURE NO OBJECTS ARE ON THE PRESS BED, OR A CRASH WILL OCCUR!

SET HOME POSITION